Navigation introduction

Road Safety

WARNINGS:
The system provides you with information designed to help you reach your destination quickly and safely.

For reasons of safety, the driver should only program the system when the vehicle is stationary.

The system provides no assistance with respect to stop signs, traffic lights, areas under construction or other important safety information.

Do not use the system until you have familiarised yourself with its operation.

Only view the system display when driving conditions permit.

Safety information

Read and follow all stated safety precautions. Failure to do so may increase your risk of collision and personal injury.

Ford Motor Company shall not be liable for any damages of any type arising from failure to follow these guidelines.

If detailed viewing of route instructions is necessary, pull off the road when it is safe to do so and park your vehicle.

Do not use the navigation system to locate emergency services.

To use the system as effectively and safely as possible, always use the latest navigation information. Your dealer will be able to assist with this.

    See also:

    Accelerator pedal - removal and refitting
    The procedure is the same as described in Part A of this Chapter for carburettor models. ...

    Clock - removal and refitting
    1 Disconnect the battery negative lead. Standard clock 2 Using a thin-bladed screwdriver, carefully prise the clock from the facia panel. 3 Disconnect the wiring plug and withdraw the clock. 4 R ...

    Bonnet lock - removal and refitting
    Models up to 1987 1 Working in the engine compartment, disconnect the cable from the bonnet lock by pulling the cable sheath end fitting from its bracket, then releasing the end fitting from the ...