Sun blinds

Panoramic roof
Panoramic roof

The roof blind is in two sections. Pull the handle from the front or rear of the panoramic roof and fully extend the required section.

To open the blind, slightly pull the handle against the spring mechanism, and push up to release from the hooks.

Note: Each blind section will only extend to the middle of the panoramic roof.

    See also:

    Manifold Absolute Pressure (MAP) sensor - removal and refitting
    Removal 1 Disconnect the battery negative lead. 2 Disconnect the sensor wiring plug. Do not pull on the wiring. 3 Disconnect the vacuum hose from the sensor. 4 Remove the two securing screws and ...

    Engine/transmission - reconnection and installation
    1 This is a direct reversal of removal and separation from the transmission. Take care not to damage the radiator or front wings during installation. Reconnection 2 Reconnection of the engine and ...

    Engine oil check
    CAUTION: Do not use oil additives or other engine treatments. Under certain conditions, they could damage the engine. Note: The oil consumption of new engines reaches its normal level after app ...