Technical specifications
Vehicle fluids
* Providing it meets the specification defined by WSS-M2C913-C, you can also
use
Ford Engine Oil or an alternative engine oil.
Topping up the oil: If you are unable to find an oil that meets the
specification defined
by WSS-M2C913-C, you must use SAE 5W-30 (preferred), SAE 5W-40 (except
vehicles with E85 fuel) or SAE 10W-40 that meets the specification defined by
either
ACEA A5/B5 (preferred) or ACEA A3/B3. Using these oils can result in longer
engine
cranking periods, reduced engine performance, reduced fuel economy and increased
emission levels.
Castrol engine oil recommended.
Capacities
Engine oil top up capacities
See also:
Internal connection details. Models from 1990 onwards
Internal connection details. Models from 1990 onwards ...
Washer fluid check
The front and rear washer systems are
supplied from the same reservoir. ...
Air cleaner inlet air temperature control check (Every 24 000 miles (40 000
km) or 2 years)
SOHC and DOHC carburettor
models
1 A vacuum pump will be required to test the
control components.
2 To check the operation of the air
temperature control, the engine must be cold.
First observe ...